3M.5927

Our 3M™ Finesse-it™ SRC machine polish is formulated as part of a full system to remove defects from scratch-resistant clearcoats (SRC) in collision repair. When used with 3M™ fine-grade finishing discs and soft interface pads this polish removes microfine scratches and light oxidation from tough OEM clearcoats and fully cured paints, restoring shine and clarity to finished automotive surfaces. When scratch-resistant OEM clearcoat develops swirl marks and starts to fade, our 3M™ Finesse-it™ SRC machine polish is a large part of bringing it back to its former luster. This polish, for use with ultrafine 3M™ abrasive discs and soft interface pads is formulated specifically to remove minor scratches and light oxidation on O. E. M. And fully cured automotive paints. The polish contains aluminum oxide, a common mineral abrasive and can remove microfine sand scratches up to-grade 1500 as well as swirl marks and light oxidation from SRC. For best results during spot repair on OEM clearcoats, use Finesse-it™ SRC machine polish with our Hookit™ finishing disc-grade P1500 for removing defects and our 3M™ Trizact™ Hookit™ foam disc-grade 3000 for scratch refinement. Technicians should also use soft interface pads in any SRC application. 3M™ Finesse-it™ products are specially engineered abrasives, compounds, polishes and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches or swirl marks on a variety of painted surfaces. Finesse-it™ products are an integral part of a 3M™ recommended buffing system for repairing surface defects to clearcoats, lacquered wood, solid surfaces, gel-coat powder-coat, industrial paint, acrylic and glass. 3M™ is committed to helping collision repair professionals perform in an ever-growing range of applications that simply were not possible before, including scratch refinement and defect removal in SRCs and fully cured auto paint systems. Our Finesse-it™ SRC machine polish is another example of how 3M™ applies science to life - specifically to the lives of collision repair technicians seeing speed, efficiency and consistently professional results.

3M™ SRC Machine Polish, Liquid Form, Light Solvent Odor/Scent, White, 1 qt Net Content, Bottle Container, Composition: Water, Hydrotreated Light Petroleum Distillate, Hydrotreated Light Petroleum Distillate, Distillate (Petroleum), Acid Treated, Light, Medium Aliphatic Solvent Naphtha, Aluminum Oxide (Non-Fibrous), C9-C15 Alkane, C9-C15 Cycloalkane, White Mineral Oil (Petroleum), Diethanolamine, 16000 to 20000 cSt Viscosity, Density: 0.964 to 0.988 g/mL, 0.964 to 0.988 Specific Gravity, 7.8 to 8.5 pH, 676 g/L VOC, Additional Information: >=212 deg F Boiling Point, 200 deg F Flash Point, 1 Flammability Limit

• Restores shine and clarity to scratch-resistant clearcoats (SRCs)
• Formulated to remove minor scratches and light oxidation on OEM clearcoats and paints
• Can remove micro-fine scratches up to sanding-grade 1500
• Use with 3M™ abrasive discs and soft interface pads

• SDS https://assets.unilogcorp.com/267/ITEM/DOC/3M_05113105927_SDS.pdf
• Video Link https://multimedia.3m.com/mws/media/986285O/high-frequency-buff-pads.mp4