3M.6027

3M™ premium mold and tooling compound aggressively removes sanding scratches in tooling gel coat (P600 or finer discs P1000 or finer 3M™ Wetordry™ sheets), reducing sanding and compounding time while saving time and money for marine boatyards. 3M™ premium mold and tooling compound rids boats of those annoying scratches that result from sanding. Our mold and tooling compound cuts quickly and leaves a fine finish that is easily polished to a high gloss. We recommend following up with 3M™ Finesse-it™ II finishing material (PN 09048) for a clean high gloss finish. We recommend this compound for tooling gel-coats, which have different properties than regular gel-coats. A tooling gel-coat is typically harder than regular gel-coat and therefore is often used for applications where no flexing will occur. Tooling gel-coats are ideal for molds that will not flex but will be polished to a high luster. To eliminate the fine scratches that come from sanding, we turned to science. We formulated a compound that works with the hard surface of a tooling gel-coat, resulting in a smooth surface that can be polished to a mirror-like high gloss.

3M™ Premium Mold and Tooling Compound, Solid Form, Solvent Odor/Scent, Red, 1 gal Net Content, Can Container, Composition: Tripoli (Crystalline Silica), Aluminum Oxide, Water, White Mineral Oil (Petroleum), Polyethylene Glycol, Ethoxylate Lauryl Alcohol, Hydrotreated Light Petroleum Distillate, Stearic Acid, 2-Aminoisobutanol, 100000 to 300000 cPs Viscosity, Density: 1.24 to 1.32 g/cc, 1.24 to 1.32 Specific Gravity, >7 pH, 102 g/L VOC, 150 deg C Boiling Point Additional Information

• Economical compound removes sanding scratches in tooling gel-coat
• Aggressive properties cut quickly to save time
• Finish may be polished to a high gloss
• Tooling compound works great on hard surfaces
• Compounding produces a smooth surface

• SDS https://assets.unilogcorp.com/267/ITEM/DOC/3M_051131_06027_SDS.pdf