ALC Deadman Blaster, 150 lb Media, 7 cfm Air Requirement, 27 in Tank Height, 12 in Tank Width/Diameter, 1/8 in, 5/32 in Nozzle Diameter, 15 ft Hose Length, Steel, 37 in Overall Height, 8 in Wheel, 80 to 125 psi Operating Pressure Rating, 40024 Hood, 45 to 60 min Blast Time, 1.5 cu-ft Volume Container, 40207 Moisture Separator
| Additional Information | : | 8 in Wheel, 80 to 125 psi Operating Pressure Rating, 40024 Hood, 45 to 60 min Blast Time, 1.5 cu-ft Volume Container, 40207 Moisture Separator |
| Air Requirement | : | 7 cfm |
| Hose Length | : | 15 ft |
| Material | : | Steel |
| Media Capacity | : | 150 lb |
| Nozzle Diameter | : | 1/8 in, 5/32 in |
| Overall Height | : | 37 in |
| Tank Height | : | 27 in |
| Tank Width/Diameter | : | 12 in |
- Manual pull up tank closure
- Adjustable abrasive flow valve
- 125 psi pressure relief valve
- Pressure gauge
- Pressure relieving ball valve
- Blast hood with bump hat
- Automatic shut-off if handle is dropped
- Abrasive flow is sealed at nozzle end by square sealing block
- Abrasive hose remains pressurized
- Full control of blasting at the handle
- Heavy-duty design, few wear components, economical
Instruction/Installation Manual