UHS clearcoat developed exclusively for partial, SPOT REPAIR. It stands out for its hardening speed, making possible to have the vehicle operational 40’ after the application of the clearcoat without need of heating the booth. This allows savings from energy in the painting cycle, as well as an increase in productivity.
A 10 min drying process can be done in the booth at 60°C or at 40°C for 20’. By IR-drying, 5 min.
URKIFLY can be polished approximately 1 hour after drying.
Excellent gloss finish, extensibility, with resistance to UV rays, abrasion and chemical agents are obtained.
The VOC content of URKIFLY is a maximum of 420 g/l, , in compliance with European standard 2004/42/CE IIB(D) (420) <420 g="" l="" span="" data-mce-type="bookmark" data-mce-fragment="1">