MGP.UCP934

CHASSIS SAVER™ is a high solids, VOC compliant, single component chassis paint and underbody coating specially formulated to permanently stop automotive and truck corrosion without the use of primers or topcoats. Chassis Savers unique rust stopping properties permit its application directly over tightly adhered rust after only marginal surface preparation using a wire brush and/or hand scraper to remove loose scale and rust particulate. Optimum results can be achieved by sandblasting a medium blast profile to surfaces. CHASSIS SAVER™ bonds to blasted and rusty metal-to form a rock hard yet flexible, glaze-like, non-porous finish that won't crack, chip, flake or peel. It works by isolating metal from oxygen and moisture and without these factors present. Rust stops dead in its tracks. CHASSIS SAVER™ cures by reacting with atmospheric moisture and its cured film resembles that of a catalyzed finish yet no hardeners or activators are used. CHASSIS SAVER™ is completely unaffected by road salt, gasoline, diesel fuel, oils, battery acids, hydraulic fluids, solvents, chemicals or corrosives.

Magnet Paints CHASSIS SAVER™ Truck and Auto Underbody Coating, Water Base, Liquid Form, Silver, Aluminum, Slight Odor/Scent, Composition: Aromatic Hydrocarbon Mixture, 3 to 4 hr Dry Time, 3 hr Recoating Time, 50 deg F, 2.09 lb/gal VOC, 350 to 400 sq-ft/gal Coverage Area, Application Method: Hand Scraper, Wire Brush

• Single component, no hardener or catalyst required
• Minimal surface preparation using only a wire brush
• Apply directly over tight rust or sand blasted metal
• Penetrates rust and mechanically bonds to surfaces
• Isolates metal locking out oxygen and moisture
• No primers or expensive top coats required
• Won't crack, chip, flake or peel
• Unaffected by road salt, acids, gasoline, diesel fuel, corrosives, solvents or chemicals
• Field tested and proven over 15 years in heavy truck and commercial fleet refinish markets

• MGP.UCP934 SDS SHEET https://www.magnetpaints.com/MSDS-TECH/ChassisSaverSDS.pdf