Bumper and cladding coat adhesion primer is an advanced, solvent-based coating designed to help your automotive base clear topcoat system stick to unprimed TPO plastic bumpers. Bumper and Cladding Coat Adhesion Primer sticks tenaciously to unhanded, unstuffed raw TPO plastic. Once the Adhesion primer is dry, it can be top-coated with most base clear systems without sanding or scuffing. (6.3 lb/gal VOC). Bumper and Cladding Adhesion Primer is designed to permanently stick to the bumpers, side cladding and trim found on many of today's cars, trucks and SUV's. As everyone knows, most bumpers are made from plastics that are very difficult to get anything to stick to. Bumper and Cladding Adhesion Primer WILL stick to raw TPO and polypropylene. Once the primer is on, your basecoat clearcoat will stick.
Polyvance Bumper and Cladding Coat Adhesion Primer, 1 gal Net Content, Pourable Liquid Form, White, Composition: Xylene, Toluene, Propylene glycol Monomethyl Ether Acetate, Methyl Ethyl Ketone, Methyl Acetate, Resin Blend Proprietary, 1, 2 4-Trimethylbenzene, T-Butyl Acetate, TiO2, Ethylbenzene, Talc, 60 min Dry Time, 50 to 90 deg F, Density: 7.3 lb/gal, 0.924 Specific Gravity, 600 cPs Viscosity, 6.3 lb/gal VOC, Application Method: Sprayer, Applicable Materials: TPO, TEO, PP Plastic
| Applicable Materials | : | TPO, TEO, PP Plastic |
| Application Method | : | Sprayer |
| Color | : | White |
| Composition | : | Xylene, Toluene, Propylene glycol Monomethyl Ether Acetate, Methyl Ethyl Ketone, Methyl Acetate, Resin Blend Proprietary, 1, 2 4-Trimethylbenzene, T-Butyl Acetate, TiO2, Ethylbenzene, Talc |
| Density | : | 7.3 lb/gal |
| Dry Time | : | 60 min |
| Form | : | Pourable Liquid |
| Net Content | : | 1 gal |
| Specific Gravity | : | 0.924 |
| Temperature Rating | : | 50 to 90 deg F |
| VOC Content | : | 6.3 lb/gal |
| Viscosity | : | 600 cPs |
- Sticks to smooth or textured TPO plastics
- Ideal for easy refinishing of new, unprimed OEM replacement bumpers from Toyota, Nissan, Kia, Subaru and more
- No sweat, quit sweating your bumpers in the paint booth, No need to clean, sweat, re-clean and so on
- Sticks to TPO plastic without sanding or scuffing
- Just clean the bumper with our 1000 super clean plastic cleaner and shoot the bumper and cladding adhesion primer on
- Simple, ready-to-spray, 1K formulation means there's no waste, what you don't use, pour back into the can
- Compatible with most urethane and polyester-based base clear topcoat systems
- Bumper and cladding adhesion primer does not have to be scuffed or sanded prior to top-coating and it may be top-coated at any time after application
- A proven labor-saver since its introduction in 2003
URE.3604-1 SDS SHEET
